022-62371521/ +91 9167909667 [email protected]

Aluminium Bronze Ab1 Bar

Aluminium bronze Ab1 Bar has good strength and wear resistance with reasonable machining properties. AB1 resists tarnishing and high temperature oxidation. Owing to their high strength, low oxidation rates and high corrosion resistance, our products are highly acclaimed in the market. Sidhartah Metals, extensively used in different industrial units, are strictly tested on quality grounds for ensuring optimum results. Aluminium Bronze AB1 is an Aluminium Bronze conforming to the requirements of BS 1400. Aluminium bronze Ab1 is commonly available in steel and aluminum; the names “angle iron” and “channel iron” are still commonly used (informally) even though their literal namesake, wrought iron, has been replaced by steel and aluminum for most uses.

Aluminium Bronze AB2 Specification:

  • AS1565-1985 C95210
  • B.S. 1490 AB1
  • A.S.T.M. 952
  • S.A.E. 68A/68B
  • Used where corrosion resistance is required such as marine, oil or chemical industries

Chemical Composition Of Aluminium Bronze Ab2:

Copper Alloys CU SN PB ZN FE NI AL MN SI Impurities
AB-1 Rem. 0.1 0.05 0.5 1.5-3.5 1 8.5-10.5 1 0.25 0.30

 

Aluminium Bronze bar Application (Aluminium Bronze Ab1 ):

  • MARINE
  • OIL AND CHEMICAL INDUSTRY AS VALVE FITTINGS
  • PUMP RODS
  • BOLTS
  • PROPELLERS AND PROPELLER SHAFTS
  • SPARK PLUG BODIES
  • HEAVY DUTY BEARINGS
  • GEAR WHEELS
  • WORM WHEELS
  • VALVE SEATS
CONTACT US